ISSN 0137-0944
eISSN 2949-6144
En Ru
ISSN 0137-0944
eISSN 2949-6144
Effects of oil contamination on rheological and hydrophysical properties of sandsand urban soil

Effects of oil contamination on rheological and hydrophysical properties of sandsand urban soil

Abstract

A laboratory experiment was conducted to investigate the effects of crude oil contamination on hydrophysical and rheological properties of sand fractions 0.1–0.2 mm and 0.2–0.5 mm, as well as the upper A horizon of urban soil (Urbic Technosol) fr om Lomonosov Moscow State University. Research methods included determination of minimal water content and filtration coefficient using column experiments with bulk columns, liquidity limits using Vasiliev cone, and plasticity lim it using thread rolling method. Nonlinear changes in minimal water content (MWC) were revealed: at low oil concentrations (1–2% m/m), water content increased due to aggregate formation, while at 8% contamination, a significant decrease occurred due to hydrophobization of particle surfaces. Oil contamination led to decreased filtration coefficient in sands (by 57.7% at 8% contamination of 0.2–0.5 mm sand) and significant increase in urban soil (by a factor of 5.9 at 8%), reflecting different mechanisms of oil interaction with the structure of different materials. Liquidity limits decreased in all cases (by 26.9–38.9% at 8%), whereas plasticity limits of urban soil increased by 6.3%. The results indicate the critical role of particle size distribution in determining soil response to contamination. Threshold values for acceptable contamination were established: 1% is critical for fine sand, up to 2% is acceptable for coarse sand, and urban soil requires individual assessment. Vectors of soil property changes under oil contamination at different concentrations have been determined, with practical significance for assessing the suitability of contaminated territories for economic use and selecting remediation methods.

Received: 04/24/2026

Accepted: 08/15/2026

Accepted date: 11/20/2026

Keywords: crude oil; water retention; hydraulic conductivity; plastic limit; plasticity index; liquid limit; Technosol

DOI: 10.55959/MSU0137-0944-17-2026-81-4-177-186

Available in the on-line version with: 18.11.2026

  • To cite this article:
Issue 4, 2026